公司成立于1998年

48v 100Ah Rack Mounted Lithium Battery

应用： Telecommunication, UPS, Solar system, etc

Customizable batteries: voltage, capacity, appearance, terminals, features, and more.

长循环寿命： 与铅酸电池相比，循环寿命延长了 20 倍，浮动/日历寿命延长了 5 倍，有助于最大限度地降低更换成本并降低总拥有成本。
轻的： 重量约为同类铅酸电池的 40%。铅酸电池的替代品。
高能量密度比： 即使在高放电率下，也可提供 3 倍于铅酸电池的电量，同时保持高能量容量。
宽温度范围： -20℃~60℃。
卓越的安全性： 磷酸铁锂化学成分消除了因高冲击、过度充电或短路情况而导致爆炸或燃烧的风险。
增加灵活性： 模块化设计最多可部署四个串联电池和最多十个并联电池。
应用： 通讯、UPS、太阳能系统、风光互补发电系统

-Battery Management System

充放电独立保护。
SOC、SOH显示以及用于详细操作的PC软件。
OVP、LVP、OCP、OTP、LTP 保护。
RS232, RS485, CAN communication port.

-Scalability

并行支持更多能量。
可选配LCD显示屏、MCB、GPS防盗等配件。

-Battery Specifications

Learn Every Detail About The 48V 100Ah LiFePo4 Battery

The battery bank will consist of an arrangement of 10 48V/100Ah battery banks connected in parallel, in a lithium battery cabinet.

PARAMETERS	ITEM	DESCRIPTION	CHARACTERISTICS
PARAMETERS	ITEM	DESCRIPTION	48V / 100Ah battery bank	Cabinet for lithium battery banks
ELECTRICAL	1	Nominal capacity	100 Ah @ 0.2C @25°C, or better temperature.	At least 1000Ah
	2	Nominal voltage	Between: 48V -51.2V	N/A
	3	Charging voltage	Between: 52V -58.1V	N/A
	4	Maximum charging current	100A or higher	At least 6000A
	5	Maximum discharge current	100A	1000A
	6	Maximum discharge current parallel connection	N/A	6000A
	7	Self-discharge @ 25ºC	less than or equal tol 3% per month or equivalent(percentage per period)	N/A
	8	Maintenance of lithium battery banks	N/A	You must have a DC power hub.
	8	Maintenance of lithium battery banks	N/A	You must have at least 10 thermal magnetic protections (100A to 125A) for each lithium battery bank.
CONSTRUCTION	9	Parallel connection (cabinet)	N/A	At least 6 cabinets in parallel.
	10	Parallel connection between cabinets	N/A	Right and left side capacity, must include all accessories necessary for parallel connection (bars or wiring, bolts, nuts, washers, etc.)
	11	Dimensions	Maximum 4 UR	At least (600 x 600 x 2000) mm. The height of the cabinet should not exceed 2500mm in height
	12	Wiring mode	N/A	Upper entrance and exit
	13	Static load capacity	N/A	At least 500Kg
	14	Space for battery banks	N/A	Provision to install at least 10 battery banks with a maximum height of 4UR
	15	Constitution	N/A	The cabinet must have front and rear access doors, at least two of its four sides must contain perforations.
EXTRAS	16	Weight	maximum 50 kg	less than 120 Kg (without battery banks)
	17	Dry contacts	minimum 2	N/A
	18	Grounding point	N/A	It must have a ground connection point.
	19	Terminal	M6 orM8	N/A
	20	Anti-theft	The battery bank will block discharge in the event of unauthorized movement or displacement.	N/A
	21	Anti-theft system administration	The enabling or disabling of the system must be remote and local, and must include everything necessary for its operation.	N/A
	22	Fire protection	You must have a fire containment solution	N/A
	23	Type of installation	For 19” rack	19″ structure that allows the installation of lithium battery banks.
APPLICATION	24	APPLICATION	Telecommunications	To support lithium battery banks
TEMPERATURE AND HUMIDITY	25	Storage temperature	0°C to 40°Cor better	-20°C to 70°C or better
	26	Operating temperature under load	0°C to 45°C or better	0°C to 40°C or better
	27	Operating temperature at discharge	-20°C to 45°C or better
	28	Relative humidity	5% to 95%or better	5% to 95% or better
COMMUNICATION	29	Number of lithium battery modules connected in parallel / Number of control modules connected in parallel	minimum 10	At least 6
CERTIFICATIONS	30	TRANSPORT	UN 38.3	N/A
CERTIFICATIONS	31	SECURITY	UL 1642 or CE	N/A
TIME AND LIFE CYCLE	32	Life cycle	minimum 3500 cycles @ 80% DOD @ 25°C, or better.	N/A
TIME AND LIFE CYCLE	33	Shelf life	minimum 12 years @ 35 °C	N/A
INSTALLATION ACCESSORIES	34	Power cables	N/A	AWG (or ) at 600V, super flexible, shall include eye-type terminals at the connection end to the 48V / 100Ah lithium battery bank with heat shrink insulation. Accepted colors: POSITIVE: RED or BLUE. NEGATIVE: BLACK. The cabinet shall contain the necessary connections for the connection of the 10 48V / 100Ah lithium battery banks.
		Ground wire.	N/A	6 AWG (or ) 600V, super flexible, minimum length 25 meters, including eye-type terminals at both ends with heat shrinkable insulation. Color: GREEN or GREEN – YELLOW.
	35	Communication patch cord between Li battery banks compatible with what is offered (RS485 or CAN)	N/A	Minimum category 6, minimum cable length: 1 meter.
	36	Patch cord for monitoring the battery bank	N/A	Minimum category 6, minimum length 10 meters.
	37	Necessary accessories for anchoring	N/A	All necessary accessories for mechanical coupling to a second cabinet and fixing to the floor will be included.
GENERAL PARAMETERS
MONITORING AND CONTROL	38	ALARMS	Over temperature
	39		Over Current
	40		Short circuit
	41		Overload
	42		About download
	43	Communication protocol	Must include hardware (internal or external) that supports communication via SNMP protocol.
	44	Communication interface	Must have ports: CAN or RS485
	45	Local or remote access	For monitoring and management of the battery bank, you must have different user profiles for authentication.
	46	Displaying local and remote parameters	At least the following parameters: * High temperature alarm. * Overload alarm. * Voltage, current, temperature, SOC (State of charge), SOH (State of health). * Anti-theft system status (activated/deactivated).

-Accesorios Para LaInstalacion

Cables de poder	4 AWG (o 25mm2) a 600V, super flexible, longitud al menos 10 metros, que incluya terminales tipo ojo en ambos extremos con aislante termo contractil. Colores aceptados: POSITIVO: ROJO o AZUL. NEGATIVO: NEGRO. Cantidad: Uno por polaridad, total: 2
Cable de tierra	10 AWG (o 6 mm2) a 600V o calibre equivalente, super flexible, longitud al menos 10 metros, que incluya terminales tipo ojo en ambos extremos con aislante termo contractil. Color:VERDE o VERDE- AMARILLO.
Patch cord para monitorear el banco de baterias	Categoria minima 6, longitud minima 10 metros.
Patch cord de comunicacion entre bancos de baterias Li compatible con lo ofertado (RS485 o CAN)	Categoria minima 6, longitud del cable: 1 metro.
Accesorios necesarios para el anclaje del banco de baterias en el rack de 19″.	Tornillos,grapas y rieles para anclaje a rack 19″ o material necesario para el anclaje.